Sliding support/guide SSG 7005 type 16
This standard comprises symbols and types for hangers, guides, supports and anchorages for pipelines. These are described in detail in SSG 7005. Anchorage and support elements are described in SSG 7025 - 7179.
The standard is intended for use for piping as indicted below in the dimension range DN 10 - 1200. At fluid temperatures greater than 200°C we do not recommend galvanizing as the properties of the zinc deteriorate strongly and the outer surface becomes brittle. At fluid temperatures greater than 350°C and lower than -20°C, supports must be made from material that is suitable for the calculated temperature and compatible with the piping material or include a suitable thermal barrier.
The standard for sliding support/guide with axial stop, type 16, includes two types, 16A and 16B. Sliding support/guide with axial stop, Type 16 A, is a onesided axial stop intended for insulated piping. Type 16B is a double-sided axial stop intended for insulated piping. Stop lug SSG 7100 is allways used with type 16
Construction
Type 16A
Sliding support/guide with axial stop intended for insulated piping.
Typ 16B
Sliding support/guide with double-sided axia stop intended for insulated piping.
For insulation, the internal slider shoe is provided with a covering aluminium sheet between the angle rods. The resulting enclosed room is then filled with insulation.
Designation
Designation: Sliding support/guide SSG 7005 - Type - Dy - (L) 1) - Material in sliding support
Example: Sliding support/guide SSG 7005 - Typ 16A - Dy 154 - Steel S235JRG2 as per EN 10 025
Designation: Sliding support/guide SSG 7005 - Type - Dy - (L) 1) - Material in sliding support
Example: Sliding support/guide SSG 7005 - Typ 16B - Dy 154 - Steel S235JRG2 as per EN 10 025
Из раздела: Types of SSG 7001
