Metal ware. Storage tanks for fuels and lubricants

Leningrad metal plant Co., Ltd. deals with the design of storage tanks for combustive-lubricating materials of different complexity. These tanks are divided into two types:

horizontal;
vertical.

The range also varies, as the tanks and the complexity of manufacturing the metal structures.

Steel tanks are used in the petrochemical industry and in the sphere of the national economy. They are used for acceptance and storage of petroleum products and crude oil. Welded steel casks used for the storage and dispensing of chemical materials. Along with the variety of types of petroleum products and their storage conditions there are different capacities, which are under great pressure.

Currently there are many types and kinds of storage tanks for fuels and lubricants.

The main types of storage tanks for fuels and lubricants

Vertical tanks made of steel up to 1000 cubic meters.
Tanks for transportation of fuels and lubricants.
Overhead double layer cylindrical tank for modular storage depots and gas stations;
Underground double layer cylindrical tank for block fuel stations tank farms;
above-ground fuel storage containers used at petrol stations and gas stations the unit or container;
non-standard containers and containers for storage and transportation of various substances.

On customer's request we can prepare and submit a draft project of the fuel tank (horizontal or vertical type) and produce it. All storage tanks and containers can be made according to the drawings of a customer, and have the equipment you have selected.

Construction

емкость для ГСМ

Depending on the design of the tank, it could be overground or underground. Underground tanks are installed in wet or dry soil. Both types of tanks are intended for acceptance, storage and distribution of all kinds of oil products: petrol, diesel oil, other types of oil.

Tanks for fuel and oil products, GMS are for single and double walled, bottoms can be both flat and conical. There are hatches and necks placed on the containers, a location to install the valve, the outlet and inlet flow nozzles, automatic sensor. Possible additional equipment folding, mountings, wells, facilities services.

Storage tanks for fuels and lubricants can have different terms: from 5 to 60 cubic meters. Horizontal storage tanks for fuels and lubricants are metal structures based on two pillars, which are welded to the bottom of the tank. All parts of the tanks are made of steel and treated corrosion-resistant coating. All seams are welded with high quality and dependable, they are repeatedly tested under pressure.

Check other types of metal ware